How To Change Your Hyundai Key Battery

Do you own a Hyundai but struggle with the battery of your key? If you answered yes to the question, this article will prove to be useful. You must first learn how to access the Hyundai key fob before you can change the battery in it. The procedure could change a little based on Hyundai's model year.

If You Own a Newer Model

Start by removing the metal key from a Hyundai that is not too old by pushing and holding the metal tab. Then, put the metal key into the minuscule opening and turn it in either way to release the rear cover of your Hyundai key fob. The case ought should then open.

If You Own an Older Model

The side of the key has a little notch if you drive an older Hyundai vehicle. To gently open the key at the notch, you can attempt to use a coin or a flat screwdriver in your car.

Ultimate Guide on Replacing Your Hyundai Key Battery

Once your key fob is disassembled, carefully raise the circuit board to reveal the battery. Before removing the battery from the key, make a note of its placement so you can know where to put the replacement.

Find out what sort of battery your Hyundai key has and purchase a replacement. A CR2032 battery powers the majority of Hyundai key fobs. These are inexpensive batteries that are widely available both offline and online in most places.

Once you have a new Hyundai key replacement battery in your possession, insert it into your key fob exactly where the old one was. Check to see that the battery is in touch with each connector.

When your Hyundai key is put back together, be sure to replace any metal keys you may have taken out.

Congratulations on replacing your Hyundai key battery! Now that you are done with it, you have to reprogram your Hyundai key. It is a simple process so you don’t need to worry about it.

Reprogramming Your Hyundai Key

As soon as you get inside your Hyundai car, you must first shut all the doors. When all doors are closed and locked, you can now turn your Hyundai's ignition to the "ACC" (accessory) position using your key. When your car's lights start to flash, press and hold the "open" or "unlock" button on the Hyundai key.

Congratulations! Now that your Hyundai key has been replaced and configured, you should be ready to go. However, be careful to test your key multiple times to make sure it's operating properly.

If it is still faulty in the rare event, reopen the case and check to make sure the connections are intact and touching the battery in the proper location. Try reprogramming your Hyundai key again after that. A complete Hyundai key replacement may be necessary if the key is still inoperable. You can schedule an appointment with us and our experts will do the job for you.

Also, keep in mind that the aforementioned procedure for programming Hyundai key fobs only functions with key fobs that have already been set up for your Hyundai. If you own a brand-new Hyundai, we will suggest for you visit us directly. Let our experts settle your problems for you.