Empire Hyundai of New Rochelle

Call 914-618-4209 Directions

By submitting your information, you agree to the sharing of your information between Hyundai Motor America and its authorized dealers.

How To Change Hyundai Door Panels

There may be a time when it becomes necessary to remove your door panel, regardless of the reason. A rattle that comes from your door as you drive, a window that doesn't work, door handles or locks that don't work properly, or even faulty switches could be to blame.

When you do not know how to change Hyundai door panels or do not have the proper direction or the appropriate tools, removing door panels can be a challenge. However, the few steps given below will make the process easier.

Materials Required

  • Screwdrivers with long and short flat heads
  • Small metal pick
  • Door panel clips

Taking Off the Door Panel

  • Step 1: Get your vehicle ready

Turn off your engine and put your car in park. If you plan to work outside of the car, it's advisable to park it in a shaded area, as the temperature can be extremely high without shade.

  • Step 2: Remove the covers and lights

In order to reveal the mounting screws, lightly pry on the covers and lights on the door panel.

  • Step 3: Identify all the mounting screws

There are usually about four to five screws visible on most door panels.

  • Step 4: Separate the door from the door panel

Pull the bottom of the door panel firmly away from the door once all of the screws and panels have been removed. In this way, the locking tabs should be released.

  • Step 5: Take the panel off

The door panel will then be able to be lifted up and away from the door by prying it from the door.

  • Step 6: Examine the door clips

The panel should be examined after it has been removed to verify that no clips have broken in the process of removal. Replace any broken clips as soon as possible.

Mounting the Door Panel

  • Step 1: Electrical connections

Connect the electrical connections that were disconnected during the removal of the door panel by holding it close enough to the door.

  • Step 2: Mount the panel

The new panel needs to be installed into the seal of the window before it can be attached. If you hear the clips snap in place, it means you have finished installing the top.

  • Step 3: Replace the plastic covers and screws

Push the plastic covers back into their seats after installing all of the mounting screws. By doing so, you ensure that the door is securely attached.

  • Step 4: Inspect the door

Check that the ordinary functioning of the door has been restored by turning on the ignition and switching on all the switches.

Conclusion

If you have the correct tools and materials, removing a door panel for replacement or performing other repairs to the door is a straightforward process. It's not a big deal to remove the door panel by yourself. Our service professionals at Empire Hyundai of New Rochelle can inspect and fix your car door if you are experiencing problems with it or find it challenging to fix.